Request for Phil Williams: I need to acquire a very basic drawing/schematic for the Super Cold Machine, water cooled only. What I have is all the parts that were bought to fix a Super Cold Machine and no drawing to tell me what part connects to what part. I want to be able to service the unit myself and am willing to climb the curve to be able to do so. I have already contacted the seller of the parts and they told me they do not have a manual for assembly. A simple block drawing will do. What line connects to what valve to what line at the evaporator, where does the drier go in what line, etc etc. I have Calder's book, I have searched all over online, I have called A/b technical, I have the A/B service manual, I have the A/b installation manual. Nowhere is there a simple drawing of this system for a DYI type of project. I have the gauges to charge it, I can buy the oil and R134a in small cans. I just need some direction. If anyone on this forum can help, please contact me ofline at lb2001@tm.net. I will be more than happy to give a list of the parts, digital photos if needed to give you all the info to make a drawing of this system. Thank you, LB