Does anyone have a schematic of the Electronic control module for the cold machine? The recurring problem of going into non-starting mode (starting cycle occurs in ~30 second intervals without starting the compressor) of operation has driven me to consider redesign this system. The compressor has a four (4) point power input. A schematic of the input requirements would be a helpful alternative. My installation has 1100 Amp Hours of battery capacity that is connected to a three stage, 130 Amp SMART charging system. The power cables are #6 wire, less than 20 feet long. Power is not the issue in my situation. I don't want to spend $375 on new control module if all I can expect is more of the same!