changing running light bulbs

[Stressless]

This seems very basic, but I need to change the bow running light bulb and cannot get the light housing open. I have removed the two screws in the back, which mount the light to a plate. l this exposes the light which is then hanging by the wire. I also removed the two screws on the front of the light, but the lens does not come off. I am reluctant to start prying anything and breaking something. Any hints?

 

[Don S/V ILLusion]

It's often hard to separate the housing. Some gentle persuasion should work.

 

[hvbaker]

The ones in the front hold the lens on. The ones on the back mount the assembly. Pry away if it breaks the are not very expensive to replace.