Catalina 27

Status
Not open for further replies.
C

can27

Hello, new catalina 27 (1990) owner and I just purchased a boat withour cradle or trailer. Is it realistic to try to trailer these boats? Also, how do I find the necessary cradle dimensions to be able to search for one to purchase? thanks.
 
Feb 26, 2004
98
Pearson 365 Ketch Memphis, TN
Yes and No ... what is your tolerance for pain

I was once part of a crazy plan to move an Ericson 32 by trailer from Dana Point, CA to San Carlos, MX. It can be done, but requires planning and permits. You will also have to arrange some type of hoist to deal with the mast and rigging on both ends of the transit. I don't think this is something you would want to do for a weekend at the lake. The trailer we purchased for the adventure was adjustable and "set" to the specific vessel by trial and error. It only took four Ins and Outs with a sling hoist to get it right. Ol' Dave
 

Ross

.
Jun 15, 2004
14,693
Islander/Wayfairer 30 sail number 25 Perryville,Md.
Mark, Friends I know use two extension

ladders to form an "A" frame for raising and lowering masts up to about 35 feet. edit to add: adding some weight to the trailer tongue will reduce fishtailing.
 
F

Fred

Go to the Catalina Direct website and

get on the Catalina 27 chatlist. The folks there have done everything a person can do to and on a C27. There will be an archive of trailer stuff. Someone will have cradle dimensions. It's a boat that makes enthusiasts out of owners. I've had 3 of them over the years. Great boat. I am not in any way affiliated with Catalina Direct. They just host the website.
 
G

gregg whittenberger

I have all the numbers for you...call

Hello: Give me a call at 724-789-9194 I can help you out. Gregg Viking Trailers
 
Oct 3, 2006
1,024
Hunter 29.5 Toms River
Sand Sailor

something just looks..wrong in your picture compared to Echo. Is it an optical illusion, or is the front third of the trailer bowed?
 
Sep 19, 2006
643
SCHOCK santana27' lake pleasant,az
the tongue runs up hill from a cross

member just ahead of the axle it extends out about 9'from where its at in the pic
 
Status
Not open for further replies.