Can it work?

[hummingbirdbassist]

First off I want to say I FOUND a boat scrap yard in Belmar Nj,,,, that is sweet!!!! I went there today and had a pocketful good time.
Went looking for Yanmar 2qm15 exhaust and found at least 4 yanmars,, 2qm and others, westerbeakr, atomic, Bimini tops, winches,, I even found the Yanmar hand crank for engine, sailboats and powerboats galore!!!!! So my question is on the Yanmar 2qm 15 's that were there they had riser exhaust, mine had slope elbow exhaust, are they interchangeable? If so what adaptations I need to do? It bolts up the same but the hose on the elbow is top mount and riser is side mount

 

[woodster]

First off I want to say I FOUND a boat scrap yard in Belmar Nj,,,, that is sweet!!!! I went there today and had a pocketful good time.
Went looking for Yanmar 2qm15 exhaust and found at least 4 yanmars,, 2qm and others, westerbeakr, atomic, Bimini tops, winches,, I even found the Yanmar hand crank for engine, sailboats and powerboats galore!!!!! So my question is on the Yanmar 2qm 15 's that were there they had riser exhaust, mine had slope elbow exhaust, are they interchangeable? If so what adaptations I need to do? It bolts up the same but the hose on the elbow is top mount and riser is side mount

it would be better if it had the riser on it ....that helps prevent back water from going in the engine exhaust ports as far as the hose is concerned you may have to get a side entrance muffler to make it work unless the riser is high enough to put a hose on it and to the top of the muffler.....would mind telling me how much the wenches were going for

 

[hummingbirdbassist]

Woodster, I did not buy any winches but they were there big and small some loose and some still attached to hull pieces, Edson pedestals with compass', Bimini tops all sizes,fuel tanks, mufflers, props, cushions, mast, roller furlings, and BAGS of sails everywhere!
My bounty: riser exhaust
5 plates of dinnerware
Crank handle
Cabin wind scoop
Tool box
Can of paint
2 crab cages
Sail bag
A current emergency kit( flares etc) and other nic knacks
All for $60
Going to take some measurements of my cockpit and possibly go back next week for a Bimini and a few other things

 

[woodster]

Woodster, I did not buy any winches but they were there big and small some loose and some still attached to hull pieces, Edson pedestals with compass', Bimini tops all sizes,fuel tanks, mufflers, props, cushions, mast, roller furlings, and BAGS of sails everywhere!
My bounty: riser exhaust
5 plates of dinnerware
Crank handle
Cabin wind scoop
Tool box
Can of paint
2 crab cages
Sail bag
A current emergency kit( flares etc) and other nic knacks
All for $60
Going to take some measurements of my cockpit and possibly go back next week for a Bimini and a few other things

man you made out like a pirate lol ...check and see if you need a side loading muffler ...at those prices it would be worth it

and if you see some lewmar 16st wenches give me a heads up plz

 

[hummingbirdbassist]

Will do on the winches, I hope the exhaust works with my current muffler, may just need another few inches of wet hose. Send me a email hello:
Hummingbirdbassist@gmail.com
That way I have a contact other than via site, if I see winches I can price and send pics
Will

 

[woodster]

Will do on the winches, I hope the exhaust works with my current muffler, may just need another few inches of wet hose. Send me a email hello:
Hummingbirdbassist@gmail.com
That way I have a contact other than via site, if I see winches I can price and send pics
Will

thanks Will email on its way

 

[hummingbirdbassist]

Woods tee if you see this message call me or email me a good number.
Will

 

[cjfj]

First off I want to say I FOUND a boat scrap yard in Belmar Nj,,,, that is sweet!!!! I went there today and had a pocketful good time.
Went looking for Yanmar 2qm15 exhaust and found at least 4 yanmars,, 2qm and others, westerbeakr, atomic, Bimini tops, winches,, I even found the Yanmar hand crank for engine, sailboats and powerboats galore!!!!! So my question is on the Yanmar 2qm 15 's that were there they had riser exhaust, mine had slope elbow exhaust, are they interchangeable? If so what adaptations I need to do? It bolts up the same but the hose on the elbow is top mount and riser is side mount

What's the name of this place. You can tease us and not even let us in on the name of the place. I smell a road trip, I'll even take the second best bimini they have for a H34

 

[hummingbirdbassist]

Temporary staging and parts yard
5147 belmar blvd
Wall twp nj
07727
321-258-9231(AL)

Nice yard!!!!
Great guys!!!
CHEAP prices !!!!!!
Bought stuff as low as 1.00!!!!
Biminis Galore,winches, pumps, more engines than I could count . Mast, roller furlings, shackles, cleats, whole,,,, whole,,,, did I mention whole Untouched sailboats and powerboats. ( untouched meaning not stripped) for SALE . From trailer sailors to 35-40 full keels!!!
I'm a fan for sure. All boats courtesy of MS.Sandy!!!!

 

[cjfj]

Temporary staging and parts yard
5147 belmar blvd
Wall twp nj
07727
321-258-9231(AL)

Nice yard!!!!
Great guys!!!
CHEAP prices !!!!!!
Bought stuff as low as 1.00!!!!
Biminis Galore,winches, pumps, more engines than I could count . Mast, roller furlings, shackles, cleats, whole,,,, whole,,,, did I mention whole Untouched sailboats and powerboats. ( untouched meaning not stripped) for SALE . From trailer sailors to 35-40 full keels!!!
I'm a fan for sure. All boats courtesy of MS.Sandy!!!!

Thanks hummingbirdbassist,
I'll give them a call. I need just about everything but would really like to get a real bimini to replaced the 2 bow cheap thing the broaker put on to say it had one. I'll give them a call and see what they have and the hours.