Cable Run

[Beneteau 321]

Has anybody out there ran wireing to the wheel pedistal on a 1997 Ben 321-any help/ short cuts woud help

 

[Kurtclem]

I have 2000 321, drilled a 3/4 hole near pedestal and ran 3/4 electrical duct from lowes to instrument cluster, had it follow the bars.

 

[DougM]

On my 323 which is a newer design, I just pulled up the floor board over the steering quadrant, found that there was a wire grommet between the starboard lazartte and the sub floor where the original pedestal wiring came through, from there, that wiring went directly up the center tube to the instrument pod. I just followed that route.