Does anyone have an address for the bow lights on an older hunter 25? Those are the one built in the hull. I could put them on the pulpit but these look corroded and need replaced to keep from leaking in the boat. NOS will be ok.
- Status
BOW LIGHTS RESPONSE
DEAR, DAN I READ YOUR ARTICLE AND IF YOUR BOW LIGHTS ARE THE FISH EYE SHAPED ONES YOU CAN GET THEM FROM EAST END OR LEWIS MARINE CATALOGUES. I HAVE SEEN THEM IN THERE AND AM ALSO ORDERING THEM FOR MY BOAT. RUSS KLINE YOU CAN REACH ME AT RiSKIT37@cs.com
DEAR, DAN I READ YOUR ARTICLE AND IF YOUR BOW LIGHTS ARE THE FISH EYE SHAPED ONES YOU CAN GET THEM FROM EAST END OR LEWIS MARINE CATALOGUES. I HAVE SEEN THEM IN THERE AND AM ALSO ORDERING THEM FOR MY BOAT. RUSS KLINE YOU CAN REACH ME AT RiSKIT37@cs.com
Thanks for the information, Do these companies have a web presence? Or maybe a catalog? I am not sure if I have heard of these guys.
I've got old winches
I can't help with bow lights. However, I replaced jib sheet winches last year. You can have old ones if you want. One works, the othe other is broken but could be useful for replacement parts. Brand name is Seaboard. Email me at sailer740@aol.com. I guess you could glass over the holes where the original lights were and install new lights. This wouldn't be too big of a job if you're planning on painting the hull anyway. I did hull and deck of my boat last year. Working on interior this year. Good luck with your project.
I can't help with bow lights. However, I replaced jib sheet winches last year. You can have old ones if you want. One works, the othe other is broken but could be useful for replacement parts. Brand name is Seaboard. Email me at sailer740@aol.com. I guess you could glass over the holes where the original lights were and install new lights. This wouldn't be too big of a job if you're planning on painting the hull anyway. I did hull and deck of my boat last year. Working on interior this year. Good luck with your project.
I got winches
Yea, I was thinking along those lines of filling them in and painting them, but what the heck, seems there is a source for the new ones. Sure I can always use winch parts and pieces. I haven't even looked at them yet. But if the rest of the boat is any indication of the winches. I am in trouble. Check on shipping to Charleston. Shouldn't be to much. Danny Covington 1735 Ashley Hall Rd Apt 325 Charleston, SC 29407 Many thanks
Yea, I was thinking along those lines of filling them in and painting them, but what the heck, seems there is a source for the new ones. Sure I can always use winch parts and pieces. I haven't even looked at them yet. But if the rest of the boat is any indication of the winches. I am in trouble. Check on shipping to Charleston. Shouldn't be to much. Danny Covington 1735 Ashley Hall Rd Apt 325 Charleston, SC 29407 Many thanks
Re: YOUR RESPONSE TO MY QUERRY
AS FOR THE PLY BOARD YOU CAN GET AWAY WIYH USING STANDARD MARINE PLY & PAINTING IT WHITE AS I'M DOING, IT LOOKS NICE WITH TEAK OR MAHOGANY TRIM. YOU ALSO SOUND AS IF YOU HAVE AS MUCH WORK AS I DO. I AM NOW FINISHING UP THE INTERIOR WORK BUT MAY HAVE TO POSTPONE FOR A WHILE SINCE MY WIFE IS PREGNANT. YOU KNOW A SAILORS LUCK. AS FAR AS A CRADLE OR A TRAILER GOES , YOU CAN MAKE A REAL NICE CRADLE YOURSELF AND YOU COULD EVEN MAKE IT ONE THAT WOULD GO ON A FLAT TRAILER THAT YOU CAN EITHER MAKE OR PURCHASE. IF YOU WISH TO CONTACT ME YOU CAN REACH ME AT RiSKIT37@cs.com GOOD LUCK RUSS
AS FOR THE PLY BOARD YOU CAN GET AWAY WIYH USING STANDARD MARINE PLY & PAINTING IT WHITE AS I'M DOING, IT LOOKS NICE WITH TEAK OR MAHOGANY TRIM. YOU ALSO SOUND AS IF YOU HAVE AS MUCH WORK AS I DO. I AM NOW FINISHING UP THE INTERIOR WORK BUT MAY HAVE TO POSTPONE FOR A WHILE SINCE MY WIFE IS PREGNANT. YOU KNOW A SAILORS LUCK. AS FAR AS A CRADLE OR A TRAILER GOES , YOU CAN MAKE A REAL NICE CRADLE YOURSELF AND YOU COULD EVEN MAKE IT ONE THAT WOULD GO ON A FLAT TRAILER THAT YOU CAN EITHER MAKE OR PURCHASE. IF YOU WISH TO CONTACT ME YOU CAN REACH ME AT RiSKIT37@cs.com GOOD LUCK RUSS
- Status