Hi All Help! I have a V222 with a missing boom. I need to get one fabricated by Dwyer, but don't have the specs. I've attached a link to a how to measure page and appreciate any help. The most important is the length from inside of the gooseneck to the inside end of boom. In addition, any information about the cross-section (dimensions, like, pic) would be a great help. This is my first boat and I'm trying to get her on the water. Thanks in advance.
Boom for V222
- Thread starter Gary Cloud 9 V2-22
- Start date
- Status
Boom size
I have mine set up in the yard, as I was trying out my loose footed main fitting for the first time. Cant wait to try it in the water. also put in a self tacking jib system. Anyway here are the dimensions of my boom! Length 9' between ends. Height 3 1/4" width 2 3/4" Diameter 8 1/4" space between boom and mast, where goose neck is located, 1 1/2" length from front of boom to boom vang attachment, is 48" Anything else, let me know!
I have mine set up in the yard, as I was trying out my loose footed main fitting for the first time. Cant wait to try it in the water. also put in a self tacking jib system. Anyway here are the dimensions of my boom! Length 9' between ends. Height 3 1/4" width 2 3/4" Diameter 8 1/4" space between boom and mast, where goose neck is located, 1 1/2" length from front of boom to boom vang attachment, is 48" Anything else, let me know!
- Status