Beneteau Oceanic 350

[John_Tasmania]

Anyone know what the initial rig tension settings should be for a Beneteau Oceanic 350?

 

[Davidasailor26]

If anyone has specifics or a tuning guide for that boat go with that. In general a starting point is about 10-15% of the breaking strength of the wire, which depends on wire diameter.

 

[John_Tasmania]

Thanks. I will start with 10% and go up from there.

 

[Davidasailor26]

Not sure if you have a Selden mast; probably not; but this is still a helpful guide -

https://support.seldenmast.com/files/595-540-E.pdf