Attempting to match / locate P28 cockpit stanchion

Status
Not open for further replies.
Jun 13, 2006
1
- - Mobile, Alabama
I am attempting to replace a P-28 stancion that was bent when a mast, from another boat, fell on the safety line, following a Hurricaine Katrina. This one is one inch in diameter and approximately twenty-four inches in height. There is one plastic lined hole mid-way for the cable and a plastic fitting at the top which the top cable fits through. The bottom of this stanchion and the plastic cap are both beyond repair. Neither the boat yard nor I, on the web site have found a match without changing many despite looking in scrap piles of boats that have been dragged in for salvage from the storm last year. If you have located a site that sells a match for the Pearson I would appreciate your sharing it.
 
B

Bob Fox

stancion

I tried D&R marine in Assonet MA I sent them the old stancion but had no luck for my P26w I finally wound up making one myself out of stainless pipe stock GL Bob Fox 1975 P26w #76 whitecap Marblehead MA
 
Status
Not open for further replies.