My 2002 Hunter 270 does not have an anchor roller. I need a roller 1.5 inches wide & having difficulty locating one that narrow. Advice would be appreciated.
Anchor Roller for Hunter 260/270
- Thread starter jimfrankelly
- Start date
- Status
Contact Gauhauer Marine. They customize some of their products.
1.5" seems too narrow for the anchor,chain, rode and link.
1.5" seems too narrow for the anchor,chain, rode and link.
Not sure but I bleieve or thought the channel is 2 inches wide. He may have miscalculated. What is the width of that channel. FYI there is an aluminium plate encapsuled in the fiberglass which to drill and tap when installing an anchor roller.
crazy dave condon
crazy dave condon
On my 240 the anchor roller channel is 2" wide. I installed a Windline URM-2 roller- it's longer than the part Hunter used, and keeps the anchor away from the hull much better. I did drill and tap the aluminum plate embedded in the glass under the channel.
Caverun;
Than you for backing me up on the deminsion. I have deleivered boats to Cave Run when I was a dealer at one time.
crazy dave condon
Than you for backing me up on the deminsion. I have deleivered boats to Cave Run when I was a dealer at one time.
crazy dave condon
Perfect fit roller
I looked it up. We used a Windline BRM-2. It holds a Lewmar Delta 14lb. The Delta semi-self launches. I’m sure the roller would hold other types, probably not Danforth due to fluke length. SS plate imbedded in hull is drilled and tapped. Worked great. Good luck.
I looked it up. We used a Windline BRM-2. It holds a Lewmar Delta 14lb. The Delta semi-self launches. I’m sure the roller would hold other types, probably not Danforth due to fluke length. SS plate imbedded in hull is drilled and tapped. Worked great. Good luck.
New owner of a 270 here - is this why the Danforth doesn't seem to fit the anchor roller on this boat? Was it designed for a Delta anchor?
I have the stock 2" channel, extends a few inches off the starboard bow with a small spring-loaded pin. Can't figure out how that's supposed to work exactly...
Roller
Our Windline BRM-2 doesn’t have a pin and I’ve never used one that does. I think it keeps the line from hopping off. Semi self launch with our setup means when you release rode tension it tends to fall. I have the rode led back to the cockpit.
Our Windline BRM-2 doesn’t have a pin and I’ve never used one that does. I think it keeps the line from hopping off. Semi self launch with our setup means when you release rode tension it tends to fall. I have the rode led back to the cockpit.
Here's a link to the windline mentioned by caverun:
http://shop.hunterowners.com/prod.php?3132/SS Light Duty Small Anchor Roller⁄Mount
I have one on my 23.5 and have a fortress fx-11 on it.
http://shop.hunterowners.com/prod.php?3132/SS Light Duty Small Anchor Roller⁄Mount
I have one on my 23.5 and have a fortress fx-11 on it.
- Status