Albin Vega #2537 For Sale

P

PKgosail

.
Apr 9, 2010
26
Just Rebuilt Yanmar 2GM20.
New Mainsail Triple Reefed.
New Cockpit Locker Covers.
New Teak Main Hatch Covers.
Tabernacle Mast System.
Roller Furling.
CQR Bow Anchor with 140 Feet Chain and 200 Feet Rope, Pivoting
Steel Fluke Stern Anchor with 40 Feet Chain and 200 Feet Rope.
Depth Sounder.
New Bottom Paint.
New West Marine Inflatable Dinghy, and Inflatable Two Man Kayak
Honda Air Cooled Outboard for Dinghy
There Is Too Much More Equipment to Mention.
The only thing this boat needs is a new deck refinishing. She's
docked at my condo in the Channel Islands harbor, Oxnard, CA.

$20,000 firm. The way this boat is equiped you could go cruising the
day you buy her.

Paul Hermanson
4200 Harbour Island Lane
Oxnard, CA 93035
Cell 805-886-9936
 
P

papasbackhoeinc

.
May 1, 2007
127
Hi

My name is Andi. I saw your e mail and hope that you could give me some info. I am not in the market for an Albin cause I am restoring one. Could you please give me any info on your mast being in a tabernacle. I want to do the same and come up with some kind of raising and lowering system so that I can trailer the boat. Thank You
Andi Anderson

PKgosail PKgosail@... wrote:
Just Rebuilt Yanmar 2GM20.
New Mainsail Triple Reefed.
New Cockpit Locker Covers.
New Teak Main Hatch Covers.
Tabernacle Mast System.
Roller Furling.
CQR Bow Anchor with 140 Feet Chain and 200 Feet Rope, Pivoting
Steel Fluke Stern Anchor with 40 Feet Chain and 200 Feet Rope.
Depth Sounder.
New Bottom Paint.
New West Marine Inflatable Dinghy, and Inflatable Two Man Kayak
Honda Air Cooled Outboard for Dinghy
There Is Too Much More Equipment to Mention.
The only thing this boat needs is a new deck refinishing. She's
docked at my condo in the Channel Islands harbor, Oxnard, CA.

$20,000 firm. The way this boat is equiped you could go cruising the
day you buy her.

Paul Hermanson
4200 Harbour Island Lane
Oxnard, CA 93035
Cell 805-886-9936
 
P

PKgosail

.
Apr 9, 2010
26
Hello Andi,

My Mast is in a stainless steel tabernacle stepped in the original postion on
the cabin top. A Stainless steel axel is at the base of the mast through the
Tabernacle and mast base. My back stays and and rear mast shrouds have large
stainless steel pelican hooks that allow me to unfasten them. Iuse the main
sheet to raise and lower the mast forward. A Harness is attatched to the end
of the mast and the lower end of the center shroudes to p the mast from
prevent the boom from swinging port or starboard during the lowering process. I do
not remove the mast as I had the system installed to get under a bridge on my
way out of the harbor.

Paul
************************************** See what's free at News, Sports, Weather, Entertainment, Local & Lifestyle - AOL
 
P

papasbackhoeinc

.
May 1, 2007
127
Hi Paul,

Thank you for the info. It is very helpfull. Any pictures? Thank You

Andi

PKgosail@... wrote:
Hello Andi,

My Mast is in a stainless steel tabernacle stepped in the original postion on
the cabin top. A Stainless steel axel is at the base of the mast through the
Tabernacle and mast base. My back stays and and rear mast shrouds have large
stainless steel pelican hooks that allow me to unfasten them. Iuse the main
sheet to raise and lower the mast forward. A Harness is attatched to the end
of the mast and the lower end of the center shroudes to p the mast from
prevent the boom from swinging port or starboard during the lowering process. I do
not remove the mast as I had the system installed to get under a bridge on my
way out of the harbor.

Paul

************************************** See what's free at News, Sports, Weather, Entertainment, Local & Lifestyle - AOL
 
You must log in or register to reply here.
Top Bottom