Any ideas on how to get under the cabinet/desk on the starboard side in the vberth on a 2008 Beneteau 40?
It appears to be installed as a unit.
There is an access with 4 phillips screws beside it, but it is also held in place by the trim/molding piece, which seems to be glued on. So far I have been unable to pry that off.
I can't see any panels that come off underneath the cabinet.
Would appreciate any tips from anyone who has disassembled this desk/cabinet/area in any way.
Or has anyone cut an access port for that area?
I need to run some wires and a hose and it is a challenge to fish with the AC duct going through there on a 90 bend.
It appears to be installed as a unit.
There is an access with 4 phillips screws beside it, but it is also held in place by the trim/molding piece, which seems to be glued on. So far I have been unable to pry that off.
I can't see any panels that come off underneath the cabinet.
Would appreciate any tips from anyone who has disassembled this desk/cabinet/area in any way.
Or has anyone cut an access port for that area?
I need to run some wires and a hose and it is a challenge to fish with the AC duct going through there on a 90 bend.
