A little history... please

Status
Not open for further replies.
B

Bob

Would appreciate your comments about H-36 (1980-82). Favorable or not. (Have already consulted Hunter's own "owners' survey). Any particular reason(s) why Hunter produced this sailboat for what amounts to only a little over two years. Would you know a little about this particular sailboat's historical background. What may have prompted its creation. How many were made. What should one look for (pay specific attention to) before buying this sailboat. Any other tidbits would be most welcome. Strongpoints, shortcomings, etc. Bob
 
D

Doug

Short Run

The Hunter 34 came out in the Fall of '82 and basically replaced the 36. I bought a 34 at that time and had looked at both the 36 and 37C. The 36 was marketed as a one couple boat, while the 34 had family sized accomodations. A 36 owner in our marina commented that the 34 was the only boat he would trade down to. At the time it wouldn't make sense to market both. The 36 is a good looking boat and the owner enjoyed his. Good luck! Doug s/v Tenacious H376
 
D

David McKie

H 36

I searched for six months to find the 36 that would meet my requirements. I have had five cruising boats prior to this 36 and I find the 36 to generally be the best value on the used market. They sail well, are comfortable and have a relatively low price. Being a marine surveyor I caution you to include your acceptance of a survey by a surveyor chosen by you as part of the P and S agreement.
 
G

George Harrell

Check Mast Step

We had an H36 hull number 25, which sunk in Hurricane Fran. Since then we bought an H34 (currently for sale) before buying our present boat a B411. The H36 was probably one of the most stable boats Hunter ever built. Beautiful classic lines. There is one "flaw" in the design that you need to check. The mast step (under the sole (floor) in the bilge) was made out of a piece of mild steel pipe about 10" long... seemed kind of short sighted for something repeatedly subjected to salt water. If it is not completely encased in fiberglass (ours wasn't), it will rust (ours did). There is a way to fix it without tearing out the world if it hasn't started to compress. Check the deck for sag around the mast. By the way, I have a few pieces and parts and a spare sail or two for a 36 if you get the boat and start looking for things. Good Luck. George
 
B

Bob

To George

George Many thanks for the comments and advices. Should I proceed with the purchase I will keep your offer in mind. Bob
 
Status
Not open for further replies.

Top Bottom