9.2 cradle dimensions/photo

Status
Not open for further replies.
R

richard965

.
Mar 29, 2010
44
S2 9.2A MI
Could someone please send me a photo of their 9.2a on the cradle and the dimensions for the cradle? My marina claims my cradle is too small for the boat - although it has been stored on it for at least 7 years - and they are afraid it will blow over:eek:
 
woodster

woodster

.
Sep 15, 2009
6,243
S2 9.2a Fairhope Al
just extend the bottom foward and aft frams with another channel iron...example if the fram is 8 feet wide at the front and rear just add a peace of 12 foot long... 4 inch or 6 inch channel iron on both ends sorta like outriggers on a craine this will give you 2 more feet each side ...making the foot print wider ...problem solved...

regards

woody

ps......... bolt it on rather than welding so later on if you need to move it all ya gotta do is take them off to transport ..
 
R

richard965

.
Mar 29, 2010
44
S2 9.2A MI
I am attempting to ascertain if I have a problem with the cradle size. That is why I would like photos - dimensions, etc.
 
sailcruiser

sailcruiser

.
Sep 6, 2011
435
richard965 said:
I am attempting to ascertain if I have a problem with the cradle size. That is why I would like photos - dimensions, etc.
Click to expand
If it helps any my 11.0a has a 14'1" long X 5'6 high and 5 wide. I don't have a pic with me but can upload one later this weekend. I would think that less length and beam would be required for a 9.2. I had these from shipping it down. It's steel and obscenely heavy. Hopefully this gives you at least a too big data point. SC
 
Status
Not open for further replies.

Top Bottom