While cruising at 3/4 throttle I hit a submerged log and took out 1/2 x 3 inch section of leading edge near tip. Plan A) dress and fair damage and duplicate on other blade. Plan B) send to prop shop to be reworked. Plan C) any one have a two bladed prop 1 inch shaft for an 8hp 1979 H27 or other advice to share. Note: snorkeled underneath and found strut tight and no other damage also engine/drivetrain smooth as before but did not push it past 1/2 throttle to get home.
8hp prop needed 79 H27
- Thread starter fnuttersny
- Start date
- Status
While cruising at 3/4 throttle I hit a submerged log and took out 1/2 x 3 inch section of leading edge near tip. Plan A) dress and fair damage and duplicate on other blade. Plan B) send to prop shop to be reworked. Plan C) any one have a two bladed prop 1 inch shaft for an 8hp 1979 H27 or other advice to share. Note: snorkeled underneath and found strut tight and no other damage also engine/drivetrain smooth as before but did not push it past 1/2 throttle to get home.
Try Ebay.....Found a new 3 blade to replace my old tired 3 blade at a quarter of the cost.
- Status