25 Oday Trailer

[huffwahoo]

I am in the process of modifying a #6000, steel twin axle trailer to accommodate my 1979 Oday cb. The last phase of the trailer is installing the winch post. If someone with a 25 oday trailer could provide me the distance from the center of the front axel to the winch post roller/stop and the height of the winch post it would be much appreciated. This should get me within the ball park to adjust the boat for the appropriate tongue weight. Thank you.

 

[RichBone]

Give me a few days and when I do down to the boat I can get that measurement for you.

Rich

 

[huffwahoo]

Rich,

Thank you!

David

 

[emergpa1]

I am in the process of modifying a #6000, steel twin axle trailer to accommodate my 1979 Oday cb. The last phase of the trailer is installing the winch post. If someone with a 25 oday trailer could provide me the distance from the center of the front axel to the winch post roller/stop and the height of the winch post it would be much appreciated. This should get me within the ball park to adjust the boat for the appropriate tongue weight. Thank you.

Will the measurments for the 26 work, if so i can get you that tomorrow
keith

 

[RichBone]

I measured 12' 10" from the center of the axles to the center of the bow eye.

Rich

 

[huffwahoo]

Thank you again for all your help!

 

[huffwahoo]

Rich (RBone) provided what I needed. Thank you for reaching out and offering assistance.

Have a great day

David

 

[kdssail]

on my modified trailer I measure 162" from the back of the front axle to the upright of the wrinch assy. the hook is 52" above the frome and the bow support roller is 56" up from the frame. add 16.5" if you want to measure from the center point between the axles ( twin axles) See my post for jpg of my 26 trailer ....kdssail@hotmail.com