1992 Hunter 33.5 windlass

Status
Not open for further replies.
Nov 15, 2008
1
Hunter 33.5 Grand Rivers, KY.
Has anyone installed a windlass on a 1992 33.5 Hunter ??
If so could you give me information on such please.
thanks
Glen
 
Jun 2, 2004
5,802
Hunter 37-cutter, '79 41 23' 30"N 82 33' 20"W--------Huron, OH
If you use "Search" above you will find several posts regarding a windlass on the H33.5. Then in "Owner's Mods" under "Boat Info" you will see that there once was a 33.5 project but it was lost in the conversion. Turns out that I have access to the old board as one of Phil's helpers. But I cannot find it over there. There is a very complete one there(but not here) for the 35.5. But I don't know that you would like it because it is a deck mount, not an anchor well mount. With Phil's permission I could move that one over. You might also check the H37C Owner's Mods. My own manual windlass installation inside the anchor locker is documented there.

Update: found the picture filed under H37.5. No text other than "here is my windlass installation".
 

Attachments

J

jrynd

windlass for Hunter 33.5

I installed a Quick Aries 600w in my 33.5. It was a tight fit to keep the motor out of sight below. My anchor roller was offset so that allowed the windlass to be placed against the tow rail and still feed the rode and chain through a hole under the windlass into the anchor locker. See attached picture. I can send more pictures.
Jim R
 

Attachments

Status
Not open for further replies.