1990 Hunter 30 Holding Tank

Status
Not open for further replies.
R

Ray1156

.
Jul 10, 2004
11
- - Victoria, BC, Canada
Does anyone have a photo or diagram of the holding tank and plumbing located in the port locker in the head compartment of a 1990 Hunter 30? When I bought my boat I found that the previous owner had removed everything. Probably as a result of a leaking aluminum tank. I would like to plumb in an 8-10 gallon tank.

Thanks Ray
 
T

Timmerva

.
May 12, 2007
14
Hunter 410 Baltimore Maryland
Holding Tank 30'

Ray,

The location description sounds like the same place as the holding tank I just replaced on my 1988 Hunter 30. Attached is a picture of the location. Send me your email address if you need additional pictures or a diagram of the tank.

I contacted Ronco Plastics in California. They were fantastic to work with. They did not have a mold for this tank. I sent them a diagram and pictures which they had a mold manufactured. I dealt with Scott. Contact him through Sheila Smith at Ronco Plastics (PH) 714-259-1385.

If this is the same tank, tell Scott this is the tank that Tim Cossairt ordered a couple of months ago for a Hunter 30 1988.

Tim
 
Status
Not open for further replies.
Top Bottom