Hey folks, I have a 1983 S2 11.0A that I am in the process of updating. The shower sump drain hose currently empties into the bilge (NOT GOOD). The boat originally came equipped with a shower sump pump as evidenced by the breaker on the circuit breaker panel. Can anyone advise where the pump was located and where pump exit drain hose was routed to. I posted this on the S2 Forum but only received one reply. Any help will be appreciated.
1983 S2 11.0A Shower sump drain
- Thread starter Sailor JD
- Start date
- Status
no pump for me
My shower pan appears to be designed to drop into the bilge, and I've seen it written on this forum that it's not terribly unusual. It seems that gray water from a shower might be accounted as beneficial or at least non hazardous, as for me, I dunno, haven't showered on board as the water is c'c'c' COLD
My shower pan appears to be designed to drop into the bilge, and I've seen it written on this forum that it's not terribly unusual. It seems that gray water from a shower might be accounted as beneficial or at least non hazardous, as for me, I dunno, haven't showered on board as the water is c'c'c' COLD
- Status