up on blocks
Preping the surface. just to think how much time it took to get to this tiny little aluminum pot metal cover!
ahhh the culprit. This is where all the oil comes from (usually) with the perking 4-108, at least thats what they told me i should fix to stem the oil in the bilge.
My beautiful girlfriend making my boat look even cooler
up on blocks
Pulling the perkins: rear main seal, all new hoses and better type hose clamps, plumb in a rapid oil change fitting (flip a switch and the hot oil gets sucked out of the bottom of the engine), new oil pan gasket, pull the heat exchnager and clean, new motor isolators, re wire harnesses, rebuild starter, referb velvet drive, install new shaft and pyi dipless packing gland......wow what a 2 month project. this is my buddy that helps gotta love thos guys
Kinded hauled out and finishing the bottom paint. Trinidad SR 3 coats
red is coming off......subsequently brought the hul down to patent gelcoat and fixed blisters where they were....(not many) sealed in epoxy then five coats of interprotect and the addition of a wash down pum with new through hulls with counter sunk silicone bronse fasteners.
aduffE37

up on blocks

There are no comments to display.

Media information

Album
Fishermans Boatyard 2009
Added by
aduffE37
Date added
View count
231
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
10975-1293567712-ef251d31f0cec8124c0bfcec4d722c3e.jpg
File size
38.7 KB
Dimensions
600px x 449px

Share this media

Top Bottom