trailer2; I put a long 4x4 timber on the mast crutch. It is held off the cabin forward with a 2x4 at right angles and little 1x2 feet under that. I tack the 3/8 plywood (cut outs for winches and back stays) to the 4x4 every fall with roofing nails. Then cover with a small tarp.
mainsail3; It seems to be getting lower each year. I may buy the Kelly-Hanson main recommended by Peptobismol just to keep the crew safe!
mainsail2
mainsail; original. Blown out? Comments appreciated.
trailer2; I put a long 4x4 timber on the mast crutch. It is held off the cabin forward with a 2x4 at right angles and little 1x2 feet under that. I tack the 3/8 plywood (cut outs for winches and back stays) to the 4x4 every fall with roofing nails. Then cover with a small tarp.
trailer; I made the ramp with timbers bolted to rock with anchors. I have a small metal wheel near the trailer tongue that I can "steer" up a center ramp board. I use the trailer winch to haul out, and a small come-along to pull the boat onto the trailer.
keel1; VC Tar then VC17, needs new tar as rust is poking through. Rust was less with zincs installed.
zinc; they have been on for about 22 years, freshwater, 6 months/year. About half gone.
Chris14830

trailer2; I put a long 4x4 timber on the mast crutch. It is held off the cabin forward with a 2x4 at right angles and little 1x2 feet under that. I tack the 3/8 plywood (cut outs for winches and back stays) to the 4x4 every fall with roofing nails. Then cover with a small tarp.

There are no comments to display.

Media information

Album
H23 Mainsail and Traveler Pictures
Added by
Chris14830
Date added
View count
596
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
10606-1289600762-1f0c49cd64eafcd3eea2c0fa022e2478.jpg
File size
52.7 KB
Dimensions
600px x 450px

Share this media

Top Bottom