trailer; I made the ramp with timbers bolted to rock with anchors. I have a small metal wheel near the trailer tongue that I can "steer" up a center ramp board. I use the trailer winch to haul out, and a small come-along to pull the boat onto the trailer.
mainsail2
mainsail; original. Blown out? Comments appreciated.
trailer2; I put a long 4x4 timber on the mast crutch. It is held off the cabin forward with a 2x4 at right angles and little 1x2 feet under that. I tack the 3/8 plywood (cut outs for winches and back stays) to the 4x4 every fall with roofing nails. Then cover with a small tarp.
trailer; I made the ramp with timbers bolted to rock with anchors. I have a small metal wheel near the trailer tongue that I can "steer" up a center ramp board. I use the trailer winch to haul out, and a small come-along to pull the boat onto the trailer.
keel1; VC Tar then VC17, needs new tar as rust is poking through. Rust was less with zincs installed.
zinc; they have been on for about 22 years, freshwater, 6 months/year. About half gone.
Left to right: Pad eye for traveler, jib cam cleat, raised and tilted jib winch, 150% Genoa track
Chris14830

trailer; I made the ramp with timbers bolted to rock with anchors. I have a small metal wheel near the trailer tongue that I can "steer" up a center ramp board. I use the trailer winch to haul out, and a small come-along to pull the boat onto the trailer.

There are no comments to display.

Media information

Album
H23 Mainsail and Traveler Pictures
Added by
Chris14830
Date added
View count
343
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
10605-1289600762-0ae8fdfd4c4bf912a266b19f0f8d17f5.jpg
File size
67.7 KB
Dimensions
600px x 450px

Share this media

Top Bottom