Recovered the back walls around the companion way and refinished teak.
DSC 6695
I found the original short settee to be somewhat useless so I built a little chart reading desk and settee that can also be used for counter space when cooking.
still need some non-skid tape for the steps.
Recovered the back walls around the companion way and refinished teak.
Milled new oak tracks for the black sliders. Now I'm able to lift out the sliders by pulling up into the deeper upper track and pulling out on the bottom of the slider. The original plastic crappy tracks did not allow this.
Resurfaced the Galley with new formica and rebuilt the counter top. The stove is new and it was a little large so I had to build the counter top out few inches to accommodate. All the teak was refinished with Minnie wax tung oil.
All the winches are serviced and remounted. The companion way hatch refinished with Pettit Flagship varnish. Not to impressed with how it flowed on but we'll see how it holds up. All of the stantions were re-mounted and new life lines added. All the remaining deck hardware including the bow pulpit and companion way hatch where also reset. The clear lexan hatch was rubbed out and waxed. The non-skid decking was power brushed with heavy duty rubbing compound while all the cockpit and cabin flat areas were wet sanded and hand rubbed out. Finished with a coat of Collinite #925 wax
jlillie

Recovered the back walls around the companion way and refinished teak.

There are no comments to display.

Media information

Album
8.0a Some recent pics of my restoration project 12/2/14
Added by
jlillie
Date added
View count
388
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
22862-1417537079-761279176e125b911302e8224f203578.jpg
File size
42.8 KB
Dimensions
800px x 537px

Share this media

Top Bottom