Mast raised with lifting rig still in place.
Mast raised with lifting rig still in place.
The lifting assembly in its stowed state. The rig is made from an RV awning support assembly. It telescopes and folds into a compact package.
I through bolted these eyes for mast raising stabilizing cables, and plan to employ them in a main and jib halyard guide system.
Mast raised, gin pole down.
The tubing along the mast is for holding the lifting saddle in place; it does not support any lifting force. Note stabilizing cables. These do not get particularly taught during rasing, and aren't necessary if doing this on level ground. I installed them for additional safety on land, and a necessity when on the water.
The lifting assembly in place. The lifting line runs from the mast, over the gin pole, to a pulley in the anchor locker, and to the mast winch with four turns. DO NOT USE NYLON LINE. This does stress the mast winch so it must be in good order (mounting hardware especially).
Mark Major

Mast raised with lifting rig still in place.

There are no comments to display.

Media information

Album
Mast raising system
Added by
Mark Major
Date added
View count
416
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
5065-1246390510-a60d6c06b83f7d368e6b4d47af2c88fe.jpg
File size
35.2 KB
Dimensions
450px x 600px

Share this media

Top Bottom