DSC00923 At the end of the boating season I always strip my mast of the standing rigging. Everything including my CDI Roller Furler get stowed down my cellar. I hang the furler up high on a long beam down there. The rigging is all roller up and hung. Halyards are left on the mast all done up. The mast is wrapped with long pieces of short width old polytarp for chafe protection for my main 18'x30' Polytarp.
DSC00925 At this end I pulled the tarp tight and folded it over my mast head and tied another clove hitch in the same way that I did at the bow of the boat. Then I took a 3/16" x 100' line and spiraled the boat over and under and tied it off at each end. I used another short sling to tie the back flap to the gudgions leaving it open so that air can circulate. All I can say is I must be doing something right because this tarp is about 3 years old and there isn't one rip in it.
DSC00924 I never had much luck with tarps until I came up with this method of securing the tarp. A picture is worth a 1000 words so check it out. The tarp is first draped over the mast with the ends even on all sides. I folded the tarp over the tabernacle an tied a clove hitch with a couple of half hitches. Whatever excess I had left in my 3/8" sling, I went around the mast and tied a square knot to secure it. Where the two front flaps hang down, I took a piece of strapping and used it to roll the flaps on. I used a carpenter's spring clamp to secure it.
DSC00923 At the end of the boating season I always strip my mast of the standing rigging. Everything including my CDI Roller Furler get stowed down my cellar. I hang the furler up high on a long beam down there. The rigging is all roller up and hung. Halyards are left on the mast all done up. The mast is wrapped with long pieces of short width old polytarp for chafe protection for my main 18'x30' Polytarp.
DSC01121 I have about three or four of these lines going to my lifelines from the tarp. The hitch pictured is a slipped Clove Hitch. These hitches are so simple to tie that I can do them with my right hand. You can trip this hitch by pulling on that line hanging down. Once you get to hanging these tarps you get to where you can do it without even thinking. It becomes automatic. We went through two strong gales in one day last year while anchored with this tarp and it survived it with no rips.
DSC01119 When I set these tarps up I want to use simple quick release hitches so that I can tie and untie them in a hurry. This hitch is nothing but a round turn on the bail with a slip half hitch. All I need to do to untie it is pull on the end of the line hanging down.
DSC01085 This is what I call my "Poor sailor's Bimini top." Hey, it works. It's kind of tough when I'm trolling and I get a "fish on." My Penelope looks content. I love that little animal. She's the perfect First Mate. I think this pic was taken near the Mount Hope Bridge near Bristol RI.
DSC01032 Each spring after getting her bottom painted and loaded back on the trailer, I get the mast up. If some metal crook want to take this mast he's going to have to take it down. Anyway, I always mount the boom and set up a tarp over it so I can work on the boat in days of inclement weather. The tarp also keeps the dew and the leaves out.
Joe11688

DSC00923 At the end of the boating season I always strip my mast of the standing rigging. Everything including my CDI Roller Furler get stowed down my cellar. I hang the furler up high on a long beam down there. The rigging is all roller up and hung. Halyards are left on the mast all done up. The mast is wrapped with long pieces of short width old polytarp for chafe protection for my main 18'x30' Polytarp.

There are no comments to display.

Media information

Album
Polytarps
Added by
Joe11688
Date added
View count
482
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
17437-1359058038-17699edc26bc007bc4ef08a15dae9265.jpg
File size
116.8 KB
Dimensions
800px x 600px

Share this media

Top Bottom