DSC 6709
DSC 6712
I decided to put the primer bulb on the outside because i'd rather have it leak outside than in, and its the only reason to have to lean over the back other than lift and lower the motor. I also ran the cables through a thru hull cable fitting form West Marine. I think it costs about 15 bucks. The end can be cinched up with a zip tie.
DSC 6710
DSC 6709
DSC 6708
DSC 6707
Setup to be completely controlled from the cockpit with shift and throttle cables as well as a choke cable. The choke cable is just an accessory cable i rigged up. OMC does not provide a remote kit for this. The problem it presented was that the cable end had to be clamped down in order to work. I originally set out to design and make a bracket for this but after some thought I decided to just clamp it with some hose and hose clamps to the shift cable which is stationary. seems to work ok for now.
jlillie

DSC 6709

There are no comments to display.

Media information

Album
The repower
Added by
jlillie
Date added
View count
381
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
22914-1417710062-9d245ee29553887750ad2715e120a8a6.jpg
File size
122.1 KB
Dimensions
537px x 800px

Share this media

Top Bottom