Sailboat Owners Forums

Speakers installed in the beckson access ports (that way one could easily remove them later, and still have access to the motor mount and boarding ladder).
Drill cut and run electrical for the stereo (that will be installed in the bulkhead).
Painting bottom paint on the rudder.
Ladder pieced back together. This was an EBay find ladder for $50 shipped... came off an Oday 25... I added a larger rubber stopper to it, to reduce stress on the transom... But the fit is great, and it should provide at least 1 rung if not 2 below water level.
Ladder installed, with backer, and 4200 sealing the holes.
The cockpit seat is getting glassed in, this is 2 layers of chopped strand.
This is me with my boarding ladder disassembled, fitting a plywood backer to it, and pre-drilling the holes. I later epoxied (actually poly resined) the board before installation.
Top Bottom