Test fit of new block looks great. I will clean it up and add some sealant. Then to fix my mistake and place the access port in the correct position. I might just fill it back up with foam and seal it in as I should not need to mess with this again for many years.

Test fit of new block looks great. I will clean it up and add some sealant. Then to fix my mistake and place the access port in the correct position. I might just fill it back up with foam and seal it in as I should not need to mess with this again for many years.

  • 0
  • 0
Out with the old. By the way if installing an access port it is much higher than I estimated on the Oday 19 put the port as high as you can. I estimated it way too low. Great thing with fiberglass is you can hide your mistakes.

Out with the old. By the way if installing an access port it is much higher than I estimated on the Oday 19 put the port as high as you can. I estimated it way too low. Great thing with fiberglass is you can hide your mistakes.

  • 0
  • 0
You can not even tell where the seam is. This is great stuff I will be using in many future projects.

You can not even tell where the seam is. This is great stuff I will be using in many future projects.

  • 0
  • 0
New Bow Eye block cut from PVC board two 3.5" x 3/4" x 4" glued together. At least this will not rot out.

New Bow Eye block cut from PVC board two 3.5" x 3/4" x 4" glued together. At least this will not rot out.

  • 0
  • 0
The factory used steel nuts not stainless. No wonder the bow eye was loose.

The factory used steel nuts not stainless. No wonder the bow eye was loose.

  • 0
  • 0
stern ready for gel coat

stern ready for gel coat

  • 0
  • 0
Still have a ways to go but it is getting there.

Still have a ways to go but it is getting there.

  • 0
  • 0
Just the final shaping

Just the final shaping

  • 0
  • 0
The bow eye and both sides of the cabin still need to be done. Then on to the trailer issues.

The bow eye and both sides of the cabin still need to be done. Then on to the trailer issues.

  • 0
  • 0
X

Finally getting there with the repairs

Finally had a chance to work on the 19 again.
Click to expand
There are no comments to display.

Album information

Album owner
XCIIGTWhipple
Date created
Item count
9
View count
441
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

X

XCIIGTWhipple

Media items
44
Albums
4
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top Bottom