31 July 2012. The very cool customized Igloo 5-day campers'-spec cooler. There is much more detail about this on the blog; but the plexiglass divider and grille are meant to contain cube ice while still leaving a space in front for tall items like milk and iced tea. The step of the ladder is hinged to allow one to lift the cooler lid.
13 April 2012. C44 hull no.0, 'Emerald'. This is the original strip-planked boat that was built in 1973-75 by my dad, my brother, me, Frit and Lee. It was supposed to have been my dad's actual boat, for which my little Diana is named. That never happened because we sold too many boats too early and had to hurry into making a plug over it. It was finished in 1981-82 by a know-it-all engineer who apparently never asked a single question about what makes boats reliable, safe and easy to maintain. It has some beautiful woodwork below but also a hollow bowsprit with a galvanized-steel frame, no internal access to the stuffing box, a bilge completely full of twisted hoses, wiring and cable, and various fittings screwed straight into the planking with no bedding compound. Lee and I spent all summer resolving much of the PO's nightmares for the new owner, who sailed it south after October.
13 July 2012. 'No, see, it goes to eleven. It's one more.' :)
14 April 2012. Blockhenge, in the yard.
31 July 2012. The very cool customized Igloo 5-day campers'-spec cooler. There is much more detail about this on the blog; but the plexiglass divider and grille are meant to contain cube ice while still leaving a space in front for tall items like milk and iced tea. The step of the ladder is hinged to allow one to lift the cooler lid.
15 September 2012. Photo taken in the dark of my cute little mast step. Originally the boat's hatch shroud had a rounded front and a flat section moulded into it for the mast to stand on. I hated this for two reasons-- it's a Band-Aid over a bigger problem, which is having the mast stand on cored deck; and it doesn't allow one to ever take the hatch shroud off without unstepping the rig. I am cutting off the old shroud and building an old-fashioned mahogany spray board on the front of it-- and my latest brainchild is to include a Dorade box to each forward corner. The one to starboard will house a 12vdc fan; the one to port will house the 12vdc horn and deck outlet (the same as on C44s and C48s!). This was fabricated out of solid 1/2" G-10 plate and will be filled with epoxy mixed with microfibers and then provided with a healthy fillet all around. On top of it goes the halyard-block organizer and the aluminum mast step I am making.
15 September 2012. Not the best picture of the coaming alongside of the companionway hatch. This mahogany butts into the molded coaming just forward and provides a hand-hold, a water dam and a place on which I can mount the dodger rail's feet. The halyard winches go outboard, port and starboard.
19 September 2012. Right after I got the last of the bottom down to well-sanded gelcoat. I love this pic-- the boat looks about ready to fly off the stands. What a terrific hull shape this little boat has. (The bow is at a 60-degree angle to the waterline. This is my dad's trademark with the early Hunters.)
DianaOfBurlington

31 July 2012. The very cool customized Igloo 5-day campers'-spec cooler. There is much more detail about this on the blog; but the plexiglass divider and grille are meant to contain cube ice while still leaving a space in front for tall items like milk and iced tea. The step of the ladder is hinged to allow one to lift the cooler lid.

There are no comments to display.

Media information

Album
Diana 2012
Added by
DianaOfBurlington
Date added
View count
595
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
17644-1360998778-a85204e3d665f73acdca5493830bf35e.jpg
File size
39.7 KB
Dimensions
800px x 600px

Share this media

Top Bottom