So yesterday I went to start the engine it cranked the first two times and then the third time nothing. I tried again a little while later and it cranked just fine. The batteries are less than six months old and the starter sounded strong, so I'm wondering if the starter switch is going. Has anyone replaced a starter switch. I do all of my own work (so far). I assume it's a simple matter of pulling the controller panel, disconnecting the two wires and removing the switch? Did you use one of these from this site? http://shop.hunterowners.com/prod.php?1414 Or maybe one of these from WM? http://www.westmarine.com/buy/cole-hersee--m-492-standard-switch--109357 I'm thinking I also need a rubber cover? http://www.westmarine.com/buy/cole-hersee--switch-cap-black--P000211730
I'm going to do a little more investigating before I start tearing into it. I just wanted to know what switch would be a suitable replacement in I need one.
Thanks.
I'm going to do a little more investigating before I start tearing into it. I just wanted to know what switch would be a suitable replacement in I need one.
Thanks.