Registered users don't see ads

Muffler

Discussion in 'Yamaha' started by kampuniform, Mar 24, 2017. Add this thread to a FAQ

  1. kampuniform

    kampuniform

    Joined Jan 20, 2017
    15 posts, 4 likes
    Yamaha 33
    Ca Vancouver Vancouver
    Just curious about the standard set-up on a Yamaha 33'. Lift, or water lock muffler. I'm in the final stages of boat acquisition, and the engine's exhaust elbow needs replacing in the worst way possible. However, I'm also wondering about the long-term effects on the rest of the exhaust system if the boat's exhaust was in an almost continuous state of disrepair. How's the access to these remote parts of the boat?
     


  2. dsaniti

    dsaniti

    Joined Feb 17, 2012
    13 posts, 0 likes
    Hunter 30T
    US Shorewood Yacht Club
    I just replaced the exhaust elbow on my 2GM20F and it was very difficult to do with the very limited space/access on my Hunter 30T (1991).
    The old parts came off easy after 4 bolts removed and a small tap in the right spot. Then the new parts attached easily. But getting my 2" exhaust house attached after that was the nightmare. If you can attach the new exhaust hose prior to putting the parts on the engine. Maybe you have better access than I did?
     



Turn any toilet into a Raritan for a fraction of the cost
The Raritan LBA matches your existing bowl with the pump/plumbing of a PHII or PHC. save!
NEW rigid hatch covers
Hatch protection like never before. Tough, secure, installs in seconds.
20% OFF innovative boat clips!
FixClip holds laundry, tools, anything to rails and life lines even in strong winds.
NEW, updated Get Rid of Boat Odors
The bible of marine toilets and plumbing, expanded and updated for 2016!