I just purchased an S 2 and are having graphics made. I am in the printing and graphics business. If you need one let me know size and color. I am making both side decals and for the companionway and also smaller lettering for the side stripes. On my S2 I have one black logo 3.5" tall on port and starboard side of the companionway. I am going to add one on each side of the stearn on both sides same size. I am also adding a white logo on the clear lexan companionway slat. I am also adding my hailing port across the stearn in 4" letters. Once I decide on the name I will place that just aft of midships on port and starboard sides on the hull. Any ideas or recommendations welcome. I am basically restoring the boat with a lot of updates.
I found a rebuilt YSM 12 engine in Port Aransas that I will install soon as my mechanic checks it over. I am also going to install a new fuel tank with a clean out access. We just repainted the engine compartment and put in new bilge pump and float switch. That was pretty tricky due to the lack of bilge access on the S2 8.5. Looks like I will have to replace the prop and shaft due to previous owner's lake of maintenance. I will have to haul out and do a bottom paint and replace some thru hulls. I put a new bimini and replaced the running rigging. Lot's of work! Trying to get ready for fall sailing.
I found a rebuilt YSM 12 engine in Port Aransas that I will install soon as my mechanic checks it over. I am also going to install a new fuel tank with a clean out access. We just repainted the engine compartment and put in new bilge pump and float switch. That was pretty tricky due to the lack of bilge access on the S2 8.5. Looks like I will have to replace the prop and shaft due to previous owner's lake of maintenance. I will have to haul out and do a bottom paint and replace some thru hulls. I put a new bimini and replaced the running rigging. Lot's of work! Trying to get ready for fall sailing.
Last edited: