I posted last fall about removing old macerator and permeated hoses. I've now replaced most of the hoses with Raritan SaniFlex. The smell is much improved. The only hose I haven't replaced is the short piece from the holding tank to the pump out fitting, only because it's extremely difficult to access.
My follow-up question:
When I replaced the hose from the toilet pump to the holding tank, I used the old hose to measure exactly the length of the replacement hose. Installed, it has a slight dip in the distance between the toilet and tank, and then rises a foot or so to the inlet. This means it would always hold some waste. Is this correct/normal?
My follow-up question:
When I replaced the hose from the toilet pump to the holding tank, I used the old hose to measure exactly the length of the replacement hose. Installed, it has a slight dip in the distance between the toilet and tank, and then rises a foot or so to the inlet. This means it would always hold some waste. Is this correct/normal?