Installing a transponder for my Hawk-eye depth sounder
- Thread starter sailboy98
- Start date
Welcome to the site.
I presume you're looking at an inside-the-hull transponder ? I don't have any knowledge about Tartan 30 hulls so you will want to do an acid test before mounting the xponder.
See post #7 here:
The baggy must be filled under water to eliminate all air bubbles.
Bed the transducer in a large puddle of bubble free silicone sealant.
I presume you're looking at an inside-the-hull transponder ? I don't have any knowledge about Tartan 30 hulls so you will want to do an acid test before mounting the xponder.
See post #7 here:
Depth transducer
As you know I am rebuilding Drifter. The plan is to work on the interior after launching and this includes wiring and upgrades. Anyway, how can I test the depth transducer out of the water to determine if it will work in the water? I assume all transducers at different not generic. I don't want...
forums.sailboatowners.com
The baggy must be filled under water to eliminate all air bubbles.
Bed the transducer in a large puddle of bubble free silicone sealant.