So I took all of the hoses off of my motor and I'm having problems with the routing after rebuilding the coolant pump and the raw water pump. I believe it came with the hot water heater from the factory. If anyone could give me a detailed rundown of input and output for raw water and fresh water pump and the heat exchanger and the water heater I would greatly appreciate it. The big question for me actually is the transmission cooler. Is it cool with engine coolant or Raw water? Yes, I was an idiot but I thought I would be able to remember and I did remember for a while but I got sidetracked on other projects on the boat and waited too long to reassemble the coolant system. A drawing would be super helpful. Thanks in advance!