All Activity

  • eherlihy
    eherlihy replied to the thread New O'Day owner..
    The holding tank discharge is below the waterline, and is a bronze through hull, connected to a bronze seacock.
  • eherlihy
    eherlihy replied to the thread New O'Day owner..
    Yes, my boat has/had plastic above the waterline discharges for the following: One 1-1/8" through hull for the electric bilge pump...
    • 20230518_140432.jpg
    • 20230518_140411.jpg
    • 20230518_140420.jpg
  • BarryL
    BarryL replied to the thread Lift Raft??.
    Hello, I am interested in this because I am thinking of doing an off shore race (Annapolis to Newport) and the rules require a raft. My...
  • BigEasy
    BigEasy replied to the thread C350.
    Looked at purchasing a 350 many years ago, that had been “totaled” in a hurricane. Inspected the boat on the hard, but decided against...
  • Richard19068
    Not what you want to hear but: Just don't make full revolutions?
  • Richard19068
    Richard19068 replied to the thread New O'Day owner..
    That's a good, and long, list. Does your boat have plastic through hulls for the above the waterline holding tank, bilge pump and...
  • Richard19068
    Richard19068 replied to the thread V Berth Hatch Window.
    I did similar on my O'Day 31. My issue was that the hatch is slightly rounded so the lens needs to have a radius to fit properly. Is...
  • thinwater
    Are the Raritan joker valves nitrile? Are the Jabsco joker valves still neoprene? Just curious if materials had changed. Also, if there...
  • S
    Steve_Catalina replied to the thread C350.
    Catalina350.com
  • Don S/V ILLusion
    Don S/V ILLusion replied to the thread Solar Cycle 25. Update.
    The SFI affects us ham radio people who operate on the HF spectrum more than it seems to affect my weather. It’s hard to know which...
  • C
    colemj replied to the thread Lift Raft??.
    Yes, crossing an ocean would tip the equation to a raft for me. As for hauling it up from below decks to deploy, consider that you...
  • N
    have a Macgregor 22 with a tohatsu 6hp sailpro that has a flushing port. boat is in a slip. With the motor bracket in the up position...
    • 20251011_110651.jpg
  • kappykaplan
    kappykaplan replied to the thread C350.
    De nada. :beer:
  • kappykaplan
    kappykaplan replied to the thread C350.
    Some owner reviews are here: https://catalina.sailboatowners.com/reviews.php?mid=116&model=350
  • twodzusfittings
    twodzusfittings replied to the thread V Berth Hatch Window.
    yup that!