After the mast was pulled, some corrosion was noted at the deck pass through (partners) area. The red arrows on the picture indicate some of the more severe areas. Any ideas? Regards, Earl
- Status
C45 mast
I'm pretty sure that you can have a mast section partnered in to replace the corroded section. Columbia used standard extrusions, so finding a supplier shouldn't be a problem. You might check with Andy Whiley at Irvington Marina. He has alot of pieces laying around. If you can do a tracing of the extrusion, he may be able to match something. If I can help at all, e mail me at Radicalcy at Yahoo.com Just substitute @ for at. Larry Wilson
I'm pretty sure that you can have a mast section partnered in to replace the corroded section. Columbia used standard extrusions, so finding a supplier shouldn't be a problem. You might check with Andy Whiley at Irvington Marina. He has alot of pieces laying around. If you can do a tracing of the extrusion, he may be able to match something. If I can help at all, e mail me at Radicalcy at Yahoo.com Just substitute @ for at. Larry Wilson
- Status