I'm looking for someone that could help ( I would pay for physical presence) rigging the foresail on my 26X. The CDI Flexible Furler 2 just spins. The original line that had the plastic fin with a hole in it is not connected, somehow it seemed too short, and was left off and we connected the sail with the mast down. I would also like to rig the foresail with a halyard that would allow me to raise and lower the mast with only one helper using the device that came with the boat. I'm sort of near the Annapolis, MD area in Shady Side, MD on the southeast side of the West River near the Bay.
1996 26X foresail rigging
- Thread starter jjmcp2
- Start date
Welcome to the forum!!
Does the manual in this link help? 868.pdf (sailboatowners.com)
Have you seen these?
Rigging a Macgregor 26x – the first time – Foghorn Lullaby
Raising the mast on a Macgregor 26x – Foghorn Lullaby
Macgregor 26S Rigging Mods page 24 (purplesagetradingpost.com)
Does the manual in this link help? 868.pdf (sailboatowners.com)
Have you seen these?
Rigging a Macgregor 26x – the first time – Foghorn Lullaby
Raising the mast on a Macgregor 26x – Foghorn Lullaby
Macgregor 26S Rigging Mods page 24 (purplesagetradingpost.com)
Thanks very much. I've seen and printed these files but the resolution leaves a lot to be desired. I'm really after information and pictures of the CDI Flexible Furler 2 but what I've found so far has not been any help either. A real, live person, familiar with a 26X would be the best solution. My boat is in Westport Marina in Shady Side, MD near the mouth of the West River and the Chesapeake Bay.