1 minute ago
In your owner's manual, behind the wood panel is the Anchor Locker.
The Anchor Locker has an above water drain, but the bottom of that Locker is solid.
Pictures of your repair area would be helpful.
- Thanks - the area to be repaired is in...
Has any one removed the bow wood panels at the front of the v-berth on a Hunter 38 or similar setup? I want to gain access to the inside of the bow on my 2007 Hunter 38 to do some fiberglass repair of the bow above the waterline but below the anchor locker.
Ice Breaker. I had a Hunter 38 from 2007 until 2019 cruising the Texas gulf, Florida and the Bahamas. I always kept the main in the mast and went through four hurricanes with no damage to the sail or halyard both docked and on to the hard. The fifth hurricane was hurricane Dorian in the. Abaco...
I have an Rudder Craft Rudder for an Hunter 26 I owned. I sold the boat 10 years ago with the original rudder and still have the Rudder Craft in my garage. Contact me if your interested in it. I used it for two months total.
We have a Hunter 38 with Garhauer davits and a dinghy with a Honda 2.3 similar to yours. We leave it on the dinghy and on the davits unless the weather is bad. The Honda is only 35 pounds which is why we bought it so no problem mon!
We have a 2007 Hunter 38 that we want to put solar panels on this December while the boat is in the Fort Meyer Beach area(or in the Keys if things are back up after the hurricane) prior to a cruise to the Bahamas in late January.
Can anyone recommend installers to contact who service the Fort...
Yes we are back in Pentwater May 20th. We are at 5343 West Monroe. Pentwater. If you Google it you will see the house and two docs. The mooring are a few hundred feet offshore in 17 feet of water. I have a dinghy if you need one.
Thanks so much for your help. The collar assembly failed - I found a small plastic piece with a metal barb fall out when I removed the white plastic ring! I moved the connection to a lower unused valve put in the plastic ring and compressed and I'm back in business!
We were crossing the Florida...
My 2007 Hunter 38 fresh water connection for the vanity has come loose from the manifold. I pushed it back in but it doesn't lock. How do these lock? What is the purpose of the small white ring on the fitting? Thanks