Search results

  1. sroberts

    Fin or wing?

    On the Capri 18 with the standard "fin keel", the draft is 2'. I would consider it a shoal keel. My Capri 22 with the fin keel has a 4' draft. I owned a Capri 18 for about 5 years before I purchased the 22. The sailing experience is significantly better on the 22. Maybe I never had the 18...
  2. sroberts

    Adding deck connector for mast wiring

    To add mast lights on my Capri 22 Mk1 I'm planning to drill a hole approximately at the red line, angled in order to miss the hatch hinge; the wire will be routed down through the support post. Does the thick mast support area contain only wood and fiberglass, or should I expect to drill...
  3. sroberts

    Asymmetrical tack

    I do not race the asymmetric and I aim to yank the sail in long before it could compromise the pulpit. The tack is attached to a swivel block at the bow/forestay. It is the simplest setup and is a good place to start. The block and tack line also serve as a downhaul for the jib, useful to...
  4. sroberts

    USB Port: Which, and Where to Install?

    There is a good place inside where the finished fiberglass ends just past the bulkhead. If you can find a socket that attaches from the bottom you'll only need to drill 2 screw holes in an out of the way place. It is kind of hidden in this location but it is convenient both to the power panel...
  5. sroberts

    Trade Symmetrical Spinner for Asym

    The Capri 22 class rules allow only symmetrical, though I could probably get an accommodation. Our races are all windward-leeward, and a poled out spinnaker seems to work best. There are probably a lot of symmetrical sails lying in Capri 22's that will never be used, and the asymmetric may...
  6. sroberts

    Trade Symmetrical Spinner for Asym

    Hi Capri 22 Owners - Does anyone have a symmetrical spinnaker they'd like to trade for an asymmetrical? In exchange for helping with a boat, the owner gave me what he thought was a symmetrical but it turned out not to be. It is red with a centered black square, in good shape. I already have...
  7. sroberts

    Replacement traveler end cap, '85 CP-22

    I made a couple using some scrap Ipe wood - definitely an improvement over the original plastic.
  8. sroberts

    Replacement traveler end cap, '85 CP-22

    The port side end cap that secures the line on my traveler broke beyond repair, the starboard side is shown below. Anyone know where I can get a replacement, or have ideas on how to fashion one? I may try to make a pair out of hardwood if I can't find the part. I'm not interested in spending...
  9. sroberts

    Dacron Sails - What's the deal?

    @Windy City - where are your sails listed? It may help if you provide a link to them. If that is illegal here please PM me with a link.
  10. sroberts

    Capri 22 110 Jib?

    @Windy City - how does the "deck sweeper" perform? Are you able to hold a tight heading with it or does it tend to bear off? @HERSH - the sheet-to-winch rig is well suited for sails posing for a photo.
  11. sroberts

    Single handing the boat without roller furling

    I sail single handed often, my boat has hank on 110, 135, 155 sails. I love the simple elegance of the hank-on sails, and how the sails are weighted and cut properly for their size. But they are anything but convenient. For that you can't beat roller furling. Folding my headsails takes...
  12. sroberts

    Best Auto-pilot for the Capri 22

    Many of us are living proof that an auto-pilot is not necessary for single handed sailing, even launching and retrieving a spinnaker. But it totally depends on conditions. Stronger winds, variable wind direction, limited leeway, necessity to maintain a heading all increase the value of an...
  13. sroberts

    Setting up for easy single handed sailing

    A new Capri 22 probably does not have a rotating boom, so you probably won't have the issue Delling3 noted. But if your boom rotates, Catalina Direct sells a custom boom kicker designed to accommodate the rotation. You may want to call Catalina Direct, they usually give good advice.
  14. sroberts

    Boom Secure to Backstay Catalina Capri 22

    oops, duplicate post
  15. sroberts

    Boom Secure to Backstay Catalina Capri 22

    It is not the most elegant solution but a stainless screw does the job. A Clevis pin would be better.
  16. sroberts

    Capri 22 Docs available for download

    I added Gin Pole for Mast Stepping - C22 and Capri 22 (176 Kb) in the Capri 22 download area. I built the Gin Pole recently and it worked great to take down my mast for the first time in 5 years. The Capri 22 Class Intro Pkg - Rey Newman - 2003 (5,141 Kb) is a must-read with a lot of useful...
  17. sroberts

    Capri Clam-Cleats

    The outhaul jumping the cleat has also bugged me for a long time. Your line may be 5/16" like mine - too large. 1/4" seems to be the size, my halyard (2nd photo) fits it just right.
  18. sroberts

    Time for a new trailer?

    A friend has an awesome tandem axle trailer for sale, custom built for the Capri 22 fin keel though you'd have to come to SC to get it.
  19. sroberts

    Deck hole cover/cap?

    I'd like to replace my hatch-top sheet grabber with a flush cap or small plate, yet I've not been able to find such a thing. Suggestions on what I could use? I'd rather not fill with epoxy as I won't be able to match the non-skid. Thanks, Steve
  20. sroberts

    Time for a new headsail(s). What to buy?

    @JRacer is describing my old 155 for sure - it gets overpowered easily and performs poorly upwind. I purchased a new-ish 135 a couple of years ago and it is my go-to sail for cruising. My sails also hank on and I was too often having to swap between the 110 and 155 as the wind changed or to...