Johnb's latest activity

  • Johnb
    Johnb reacted to Tedd's post in the thread The Thetford Porta Potti with Like Like.
    We got a Sani-Potty with our boat, which looks like the one that Dometic now sells. We use it quite a bit. It took me a while to...
  • Johnb
    Recommend Lonnie Esterbur 253 359 7486 DBA Canvas Loft in Tacoma.
  • Johnb
    Johnb replied to the thread Low Profile mattress.
    The most economical way is to get a standard size foam mattress and then trim it to fit. A good tool for that is an electric carving...
  • Johnb
    I had that exact same issue when we acquired our HC 37 back in 1999. I removed the old tank by accessing it through the storage bin...
    • bog.JPG
  • Johnb
    Johnb replied to the thread Flawed Logic?.
    No doubt that is a slip of the finger and you actually mean approx. 23.5 degrees. But why does this favor the Northern Hemisphere?
  • Johnb
    Johnb replied to the thread Should I add fiberglass.
    My 1976 Clipper Marine 23 developed a bunch of blisters starting in about 1989. None were bigger than a quarter. On being popped a...
  • Johnb
    Johnb replied to the thread Folding Prop?.
    It has been 16 years since we installed a flex-o-fold on our HC-37 and we have had zero problems. I would guess over 2000 hours of...
  • Johnb
    Johnb replied to the thread Eno Stove Burner - bad mixture..
    You do have a working carbon monoxide detector?
  • Johnb
    Take courage,it may not be as bad as you fear. We did a big project to replace all the portlights and had to deal with a lot of water...
  • Johnb
    Johnb replied to the thread Dinghy floor replacement.
    I considered starboard for boarding steps but was advised against by Tap because it is super slippery and “nothing sticks to it”. Now...
  • Johnb
    Johnb replied to the thread De Persia Automatic Bailer.
    Long ago on a continent far far away I installed Elvstrom self bailers (Rig Rite $79). The equivalent is available from West Marine and...
  • Johnb
    Johnb replied to the thread ALWAYS A MESS!!!.
    The last time I changed the oil in my Yanmar 3QM30 I got interrupted after I had pumped the oil out and before taking off the oil...