The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.
Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.
Laz floor just sits loose, not fastened, I like to be able to remove it if needed.
Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.
The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.
Hatch for storage below vee berth
New mast cap, put the old flat one at the base of the mast. I drilled holes in the mast crane added some sheaves in there, and moved the main halyard to it, and added a topping lift in addition to the back stay.
Harken traveler
Doug J

The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.

There are no comments to display.

Media information

Album
Tiller Time Mod's
Added by
Doug J
Date added
View count
359
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
1934-1227136747-30e00218e4065e0432211f55f581c756.jpg
File size
28.6 KB
Dimensions
600px x 400px

Share this media

Top Bottom