Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.
The laz floor made in two pieces, for easy insertion and removal.
Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.
Laz floor just sits loose, not fastened, I like to be able to remove it if needed.
Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.
The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.
Hatch for storage below vee berth
New mast cap, put the old flat one at the base of the mast. I drilled holes in the mast crane added some sheaves in there, and moved the main halyard to it, and added a topping lift in addition to the back stay.
Doug J

Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.

There are no comments to display.

Media information

Album
Tiller Time Mod's
Added by
Doug J
Date added
View count
333
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
1935-1227136747-273a1675b69af5a16a199a716e752acd.jpg
File size
21.4 KB
Dimensions
400px x 600px

Share this media

Top Bottom