Assembled with exterior 1/4" plywood and hung. I shot two coats of white epoxy followed by two coats of polyurethane
Screwed it in place to the 2 x 4 cleat and it rests nicely on the seat and the ledge.
First a dry fit
Installed a 2 x 4 though bolted to the v-berth with s.s. screws and lock nuts
Assembled with exterior 1/4" plywood and hung. I shot two coats of white epoxy followed by two coats of polyurethane
I assembled both legs onto a 2 x 6 using exterior screws and glue.
Starboard leg in place to check fit
Measured out to cut the height
nosnebjim

Assembled with exterior 1/4" plywood and hung. I shot two coats of white epoxy followed by two coats of polyurethane

There are no comments to display.

Media information

Album
Extending the V-Berth
Added by
nosnebjim
Date added
View count
336
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
18334-1367596089-b9ac7183f3da8f287f5916cdfd4b11ef.jpg
File size
67.1 KB
Dimensions
800px x 600px

Share this media

Top Bottom