Whisker pole storage, port side.

Whisker pole storage, port side.

  • 0
  • 0
New mast cap not only had a nice rounded top, but also provides a couple additional attachment points

New mast cap not only had a nice rounded top, but also provides a couple additional attachment points

  • 0
  • 0
New Idasailor rudder installed

New Idasailor rudder installed

  • 0
  • 0
New Idasailor rudder installed with 1/4" yacht braid used for hoisting line

New Idasailor rudder installed with 1/4" yacht braid used for hoisting line

  • 0
  • 0
New Idasailor CB next to old

New Idasailor CB next to old

  • 0
  • 0
New Idasailor CB next to old one. Had to drill new hole for the hoisting line. Used 1/4" yacht braid instead of the old cable with nuts and bolt.

New Idasailor CB next to old one. Had to drill new hole for the hoisting line. Used 1/4" yacht braid instead of the old cable with nuts and bolt.

  • 0
  • 0
New Idasailor CB installed

New Idasailor CB installed

  • 0
  • 0
Mast support, made to fit nicely pinned in the tabernacle. I have since rounded the corners, prettied it up and stained it.

Mast support, made to fit nicely pinned in the tabernacle. I have since rounded the corners, prettied it up and stained it.

  • 0
  • 0
I use a PVC raingutter to provide support for CDI furler, fastened with ball bungies while trailering. I put the gutter on top, so water will not be able to sit inside.

I use a PVC raingutter to provide support for CDI furler, fastened with ball bungies while trailering. I put the gutter on top, so water will not be able to sit inside.

  • 0
  • 0
This flat cap was originally at the top of the mast. I moved it to the bottom to make the base stronger. Also keeps birds from building a nest in there, I had one once.

This flat cap was originally at the top of the mast. I moved it to the bottom to make the base stronger. Also keeps birds from building a nest in there, I had one once.

  • 0
  • 0
Routed the pipes hugging the wall, allows better storage.

Routed the pipes hugging the wall, allows better storage.

  • 0
  • 0
I did away with the OEM plastic tubing. Replaced it with PVC

I did away with the OEM plastic tubing. Replaced it with PVC

  • 0
  • 0
This is what the laz floor looks like installed. I have since made a wood floor. But this is a descent, easy, inexpensive option.

This is what the laz floor looks like installed. I have since made a wood floor. But this is a descent, easy, inexpensive option.

  • 0
  • 0
The laz floor made in two pieces, for easy insertion and removal.

The laz floor made in two pieces, for easy insertion and removal.

  • 0
  • 0
Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.

Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.

  • 0
  • 0
Laz floor just sits loose, not fastened, I like to be able to remove it if needed.

Laz floor just sits loose, not fastened, I like to be able to remove it if needed.

  • 0
  • 0
Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.

Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.

  • 0
  • 0
The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.

The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.

  • 0
  • 0
Hatch for storage below vee berth

Hatch for storage below vee berth

  • 0
  • 0
New mast cap, put the old flat one at the base of the mast. I drilled holes in the mast crane added some sheaves in there, and moved the main halyard to it, and added a topping lift in addition to the back stay.

New mast cap, put the old flat one at the base of the mast. I drilled holes in the mast crane added some sheaves in there, and moved the main halyard to it, and added a topping lift in addition to the back stay.

  • 0
  • 0
Harken traveler

Harken traveler

  • 0
  • 0
Mast raising system on deck stowage, starboard side.

Mast raising system on deck stowage, starboard side.

  • 0
  • 0
Rudder lifting blocks

Rudder lifting blocks

  • 0
  • 0
Doug J

Tiller Time Mod's

A few mods to my 1991 Macgregor 26S
Click to expand
There are no comments to display.

Album information

Album owner
Doug J
Date created
Item count
23
View count
1,079
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

Doug J

Doug J

Media items
60
Albums
3
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Top Bottom