Put an offer on 1996 34. Some of the plastic trim for the lewmar ports could use replacement. Catalina direct says lewmar isn't making them anymore. Anyone have suggestions Model #Z2458
Lewmar Port trim kits
- Thread starter cacsail
- Start date
Hi Stu,
You can find re-engineered VAC formed Lewmar Old Style(manufactured up to 1998) Internal frame trims for various sizes on ebay UK. Bespoke frames can also be made to order. Here is the link: http://www.ebay.co.uk/sch/i.html?_f...RS0&_nkw=lewmar+internal+frame+trims&_sacat=0
Hope this helps.
Mel
You can find re-engineered VAC formed Lewmar Old Style(manufactured up to 1998) Internal frame trims for various sizes on ebay UK. Bespoke frames can also be made to order. Here is the link: http://www.ebay.co.uk/sch/i.html?_f...RS0&_nkw=lewmar+internal+frame+trims&_sacat=0
Hope this helps.
Mel
Hello Melvin
Glad to see there is an aftermarket source for this Lewmar Old Style Size 1 interior trim. Your descriptions do not specifically state this trim is for the OPENING PORTS as used in the late 80s Catalina 36.
Also curious if the P&P from the UK to the US is for one or several of these trims. I am not too keen on trimming, but do you know how much of the aluminum frame is exposed with the pre-cut model's 4mm outer return leg depth? Am not on the boat so can't judge how the 4mm would look. I assume the trim would be attached via the same Velcro method used by Lewmar?
Thank you
Jack
Glad to see there is an aftermarket source for this Lewmar Old Style Size 1 interior trim. Your descriptions do not specifically state this trim is for the OPENING PORTS as used in the late 80s Catalina 36.
Also curious if the P&P from the UK to the US is for one or several of these trims. I am not too keen on trimming, but do you know how much of the aluminum frame is exposed with the pre-cut model's 4mm outer return leg depth? Am not on the boat so can't judge how the 4mm would look. I assume the trim would be attached via the same Velcro method used by Lewmar?
Thank you
Jack
