I have a 1999 hunter 340 which I am installing an ev 100 autopilot. There is a 2000 hunter 340 at my dock which has one on installed on it. However the owner bought the bought with the wheel drive with installed. These boats have the same steering configuration. The pedestal is enclosed in a rectangular fiberglass housing. On his boat where the drive motor goes into the fiberglass housing in has what appears to be a SS flat piece of hardware attached to the fiberglass with screws to hold it in place around the hole cut in the fiberglass where the motor comes through. There is also some type of mount and similar hardware for the SS mount that fixes the wheel drive to the pedestal. Does anyone know about the hose or how to install these to the fiberglass pedestal! Any help would be greatly appreciated.