Fresh Water Pump Compression Fitting

KZW

KZW

.
May 17, 2014
831
Catalina 310 #307 Bluewater Bay, FL
The picture shows on the lower right what I believe to be a broken compression fitting at the output of the fresh water pump under the sink. It only leaks when the pump is on.

Anyone have any idea on a part number and where to get it? I believe the plastic elbow is 1/2 inch ID.

I would take the whole thing off, but then I think I'd get 50 gallons of water flowing into the bilge
 

Attachments

marchem

marchem

.
Nov 16, 2012
1,038
Catalina 310, 2000, #31 31 Santa Cruz
KZW said:
The picture shows on the lower right what I believe to be a broken compression fitting at the output of the fresh water pump under the sink. It only leaks when the pump is on.

Anyone have any idea on a part number and where to get it? I believe the plastic elbow is 1/2 inch ID.

I would take the whole thing off, but then I think I'd get 50 gallons of water flowing into the bilge
Click to expand
Is it this part? 1/2" NPT-F x 1/2" barb fitting.
https://smile.amazon.com/dp/B06Y2LQFWY
 
Ron20324

Ron20324

.
Jan 22, 2008
8,050
Beneteau 323 Annapolis MD
Looks like the hose was too short. West ought to have that part.
 
marchem

marchem

.
Nov 16, 2012
1,038
Catalina 310, 2000, #31 31 Santa Cruz
KZW said:
Perfect. I cannot thank you enough!!!
How did you find it?
Click to expand
Can't remember exactly. Started searching Amazon for the 94-231-10 pump part and came across that fitting. Happy to be of assistance and pay some back. I've gotten so much from this forum!
 
M

MitchM

.
Jan 20, 2005
1,020
Nauticat 321 pilothouse 32 Erie PA
you won't empty the water tank into the bilge if you disable 12v hot to the pump with the on off switch, then CAREFULLY remove the water inlet hose from the pump, and then tie the free end of the hose up as high as possible so gravity won't empty your h 2 0 .
 
You must log in or register to reply here.

Top Bottom