Registered users don't see ads

Bulkhead replacement on 1985 H25.5

Discussion in 'Ask A Hunter Owner' started by Urchin, Mar 5, 2018. Add this thread to a FAQ

  1. Urchin


    Joined Mar 6, 2017
    2 posts, 0 likes
    Hunter 25.5
    US USA Asheville NC
    I have just bought a 1985 Hunter 25.5 that has a bit of water damage to the main cabin bulkhead and floor boards. The bulkhead was damaged by leakage through the chain-plate. has anyone have some advise on how to do this?


  2. ggrizzard


    Joined May 27, 2004
    896 posts, 48 likes
    Hunter 30_74-83
    US Ponce Inlet FL
    Good News... Bad News!
    The bulkheads are not tabbed in very securely, but you may have to cut them down to get them out. Remember, they put them in before installing the deck/cabin liner.
    If you are in the water and have the mast up, you should build a vertical support beam for the cabin top on the inside and loosen the stays before moving the bulkhead.
    Hope this helps.

  3. Crazy Dave Condon

    Crazy Dave Condon

    Joined Jun 8, 2004
    6,048 posts, 410 likes
    -na -NA
    US Anywhere USA
    Make sure the chain plate covers that are screwed down with four ss wood screws are removed cleaning old caulk out and recaulking. Make sure you also apply caulk to screw threads. For safety, take your mast diwn

Replacement in-deck solar panel
Improved for greater output, this is a drop-in replacement. Trim ring available, too.
Hunter prop struts and shafts
Everything you need for your power train
Hunter strainers and filters
For engines, gensets, AC, and more.
Hunter faucets and parts
Replacement fixtures, hoses, sprayers, washers, and more.